These are flat-laid garment measurements from the Bella+Canvas spec PDF, not body measurements. Body length is measured from the high point of the shoulder. The 3001 runs slimmer than heavyweight cotton tees; if you prefer a roomier feel, size up.
| Size | Width | Length | Sleeve Length | |
|---|---|---|---|---|
| XS | IN | 16.5 | 27 | 7.375 |
| CM | 41.9 | 68.6 | 18.7 | |
| S | IN | 18 | 28 | 7.875 |
| CM | 45.7 | 71.1 | 20.0 | |
| M | IN | 20 | 29 | 8.25 |
| CM | 50.8 | 73.7 | 21.0 | |
| L | IN | 22 | 30 | 8.625 |
| CM | 55.9 | 76.2 | 21.9 | |
| XL | IN | 24 | 31 | 9 |
| CM | 61.0 | 78.7 | 22.9 | |
| 2XL | IN | 26 | 32 | 9.5 |
| CM | 66.0 | 81.3 | 24.1 | |
| 3XL | IN | 28 | 33 | 10 |
| CM | 71.1 | 83.8 | 25.4 | |
| 4XL | IN | 30 | 34 | 10.5 |
| CM | 76.2 | 86.4 | 26.7 |
Fit
Tailored retail fit. Side-seamed body with shoulder taping, cut slimmer through the body and arms than basic heavyweight cotton tees. Ribbed set-in crew with a tear-away label and double-needle bottom hem and sleeve hem. Order your usual size for the intended retail look. Size up one if you want a roomier silhouette or are layering.
How to Measure
- Length: measure from the highest point of the shoulder straight down to the bottom hem.
- Width: lay the garment flat and measure one inch below the armholes, straight across the chest from one side to the other.
- Sleeve length: place the end of the tape at the center back of the collar, run it along the top seam of the sleeve to the shoulder, then continue down to the sleeve hem.
Fabric Notes
- Weight: 4.2 oz / yd² (142 g/m²).
- Standard solids: 100% Airlume combed and ring-spun cotton, 32 singles.
- Ash: 99% cotton / 1% polyester.
- Pre-shrunk for minimal post-wash shrinkage.
Additional Tips
- Pro tip: Airlume combed and ring-spun cotton holds its shape well wash after wash. Wash cold and tumble dry low to keep the smooth surface intact.
- Note: measurements may vary by up to 1 inch (2.5 cm) due to manufacturing tolerances.